White Card Practice Test (CPCWHS1001) 2026: Oefenexamen 2

Oefenexamen 2 van 2 voor White Card Practice Test (CPCWHS1001): 35 extra vragen met antwoorden en uitleg.

Veiligheid op het werk
Australië
60 vragen
Gecontroleerd op 11 oktober 2026

Vraag 1 van 35
When must a SWMS be prepared?
- Only for jobs longer than a month
- Only after an incident
- Before high risk construction work starts
- Once a year
Toon antwoord
Antwoord: C. Before high risk construction work starts
The PCBU must make sure a SWMS is prepared before the high risk construction work starts.
Vraag 2 van 35
High risk construction work is not being done the way the SWMS says. What must happen?
- The work must stop immediately, or as soon as it is safe, and the SWMS is reviewed
- Keep working and fix it at the end of the day
- Tell the client after the job is finished
- Throw the SWMS away
Toon antwoord
Antwoord: A. The work must stop immediately, or as soon as it is safe, and the SWMS is reviewed
Work must stop and not restart until it can be done in line with the SWMS, which should be reviewed.
Vraag 3 van 35
Construction work with a risk of a person falling more than how far is high risk construction work?
- 2 metres
- 10 metres
- 20 metres
- 50 centimetres
Toon antwoord
Antwoord: A. 2 metres
Work with a risk of a fall of more than 2 metres is high risk construction work and needs a SWMS.
Vraag 4 van 35
Work in or near a trench deeper than what depth is high risk construction work?
- 0.5 metres
- 5 metres
- 10 metres
- 1.5 metres
Toon antwoord
Antwoord: D. 1.5 metres
Work in or near a shaft or trench with an excavated depth of more than 1.5 metres is high risk construction work.
Vraag 5 van 35
Which of these jobs is high risk construction work that needs a SWMS?
- Reading the site plans
- Sweeping the site office
- Eating lunch in the crib room
- Work that is likely to disturb asbestos
Toon antwoord
Antwoord: D. Work that is likely to disturb asbestos
Work that involves, or is likely to involve, disturbing asbestos is high risk construction work.
Vraag 6 van 35
Which task is on the list of high risk construction work?
- Filling in a timesheet
- Attending a toolbox talk
- Putting up a notice in the site office
- Work on or near energised electrical installations
Toon antwoord
Antwoord: D. Work on or near energised electrical installations
Work on or near energised electrical installations or services is on the high risk construction work list.
Vraag 7 van 35
Which of these is classed as high risk construction work?
- Checking your white card
- Work in an area where powered mobile plant is moving
- Washing your hands in the amenities
- Signing in at the site office
Toon antwoord
Antwoord: B. Work in an area where powered mobile plant is moving
Work in an area with movement of powered mobile plant, such as excavators and loaders, is high risk construction work.
Vraag 8 van 35
For construction projects worth how much must a principal contractor be appointed?
- $250,000 or more
- $10 million or more
- Any value
- $1,000 or more
Toon antwoord
Antwoord: A. $250,000 or more
A principal contractor must be appointed for construction projects valued at $250,000 or more.
Vraag 9 van 35
What must a principal contractor prepare in writing before work on the project begins?
- A WHS management plan
- A marketing plan
- A tax return
- A list of workers' home addresses
Toon antwoord
Antwoord: A. A WHS management plan
The principal contractor must prepare a written WHS management plan before work begins and make it available to workers.
Vraag 10 van 35
What must the principal contractor's site signs show?
- The weather forecast
- The names of every worker
- The price of the building
- The principal contractor's contact details
Toon antwoord
Antwoord: D. The principal contractor's contact details
Principal contractors must put up signs showing their contact details so people can reach them.
Vraag 11 van 35
You have a white card and start at a new site. What else should you receive?
- A high risk work licence
- A new white card for that site
- A site-specific induction about that site's hazards and procedures
- Nothing: the white card covers every site
Toon antwoord
Antwoord: C. A site-specific induction about that site's hazards and procedures
The white card is general. Each workplace also gives a site-specific induction about its own safety issues.
Vraag 12 van 35
What is a toolbox talk?
- A high risk work licence course
- A sale of second-hand tools
- A short pre-start meeting about the work, its hazards and controls
- A talk about tool prices
Toon antwoord
Antwoord: C. A short pre-start meeting about the work, its hazards and controls
Toolbox talks or pre-start meetings help builders, subcontractors and workers share safety information and consult.
Vraag 13 van 35
Who can represent workers when a PCBU consults them about health and safety?
- A delivery driver
- The client's lawyer
- Nobody: workers cannot be represented
- A health and safety representative (HSR)
Toon antwoord
Antwoord: D. A health and safety representative (HSR)
Workers can be represented in consultation by an elected health and safety representative.
Vraag 14 van 35
Where do you find information about a hazardous chemical's dangers, safe handling and first aid?
- The site timesheet
- Its safety data sheet (SDS)
- The weather app
- The shop receipt
Toon antwoord
Antwoord: B. Its safety data sheet (SDS)
White card training covers the purpose of safety data sheets, SWMS and job safety analyses.
Vraag 15 van 35
What is the best way to stop people falling from the edge of a roof?
- Tell workers to move faster near the edge
- Give workers sunglasses
- Put up a sign that says 'Be careful'
- Install edge protection such as a guardrail system
Toon antwoord
Antwoord: D. Install edge protection such as a guardrail system
A physical barrier like a roof perimeter guardrail stops falls. It is more reliable than signs or instructions.
Vraag 16 van 35
What does a residual current device (RCD), or safety switch, do?
- Makes power tools run faster
- Measures noise levels
- Stores electricity for later
- Cuts the power fast to reduce the risk of electric shock
Toon antwoord
Antwoord: D. Cuts the power fast to reduce the risk of electric shock
RCDs are an engineering control that reduce the risk of electric shock.
Vraag 17 van 35
You uncover sheeting that you think may contain asbestos. What should you do?
- Break off a piece to check it
- Sweep it up and put it in the bin
- Stop work, do not disturb it, and tell your supervisor
- Cut it with a power saw to remove it quickly
Toon antwoord
Antwoord: C. Stop work, do not disturb it, and tell your supervisor
Do not disturb suspected asbestos. Stop, keep others away and report it so it can be checked and managed.
Vraag 18 van 35
How does asbestos harm people?
- Breathing in its fibres can cause asbestosis, lung cancer and mesothelioma
- It only harms people who eat it
- It burns the skin on contact
- It damages hearing
Toon antwoord
Antwoord: A. Breathing in its fibres can cause asbestosis, lung cancer and mesothelioma
Asbestos fibres breathed into the lungs can cause serious diseases, often many years later.
Vraag 19 van 35
Who can remove asbestos?
- Any labourer with a broom
- Anyone wearing a dust mask
- Only people with special training and a licence
- Any worker with a white card
Toon antwoord
Antwoord: C. Only people with special training and a licence
Safe Work Australia says you need special training and a licence to remove asbestos.
Vraag 20 van 35
Which task can release harmful respirable crystalline silica dust?
- Painting a timber fence by brush
- Laying carpet
- Hanging wallpaper
- Dry cutting concrete, brick or stone
Toon antwoord
Antwoord: D. Dry cutting concrete, brick or stone
Cutting, grinding, drilling or sanding stone, concrete and masonry, especially dry, can release silica dust that causes silicosis.
Vraag 21 van 35
Which control reduces silica dust when cutting with power tools?
- Dry cutting in a closed room
- Water suppression (wet cutting) or on-tool dust extraction
- Blowing the dust away with compressed air
- Cutting faster so it is over sooner
Toon antwoord
Antwoord: B. Water suppression (wet cutting) or on-tool dust extraction
Wet cutting, on-tool extraction or local exhaust ventilation capture dust at the source. A respirator is also needed.
Vraag 22 van 35
What has applied to engineered stone in most of Australia since 1 July 2024?
- Work on or with it is banned, except for stone installed before the ban
- It can only be cut indoors
- Nothing has changed
- It can only be used for kitchen benchtops
Toon antwoord
Antwoord: A. Work on or with it is banned, except for stone installed before the ban
A national prohibition on engineered stone applies from 1 July 2024 in most jurisdictions.
Vraag 23 van 35
Which PPE helps protect against excessive noise?
- A high-visibility vest
- Earplugs or earmuffs
- Steel-capped boots
- Safety glasses
Toon antwoord
Antwoord: B. Earplugs or earmuffs
Hearing protection such as earplugs or earmuffs reduces exposure to excessive noise.
Vraag 24 van 35
Which is an engineering control for manual handling risk?
- Lifting with a bent back and twisting
- Telling workers to lift faster
- Using a hoist to lift heavy tools and materials
- Carrying as much as possible in one go
Toon antwoord
Antwoord: C. Using a hoist to lift heavy tools and materials
Mechanical aids like hoists reduce the risk of musculoskeletal injuries from lifting.
Vraag 25 van 35
How can workers on foot be kept safe from mobile plant?
- Let workers walk behind reversing machines
- Ask workers to wear dark clothing
- Separate the plant work zone with physical barriers and a traffic management plan
- Remove all signs so drivers are not distracted
Toon antwoord
Antwoord: C. Separate the plant work zone with physical barriers and a traffic management plan
Physical barriers, exclusion zones and traffic management plans keep people and mobile plant apart.
Vraag 26 van 35
A sign shows a red circle with a red diagonal line over a black symbol. What does it mean?
- Emergency information
- Mandatory: you must do this
- Warning: a hazard is nearby
- Prohibition: you must not do this
Toon antwoord
Antwoord: D. Prohibition: you must not do this
Prohibition signs use a red circle and slash to show an action that is not permitted.
Vraag 27 van 35
What does a sign with a white symbol on a solid blue circle mean?
- You must not do this
- You must do this (mandatory)
- Emergency exit this way
- Fire equipment is here
Toon antwoord
Antwoord: B. You must do this (mandatory)
Blue circle signs are mandatory signs, such as 'hard hats must be worn'.
Vraag 28 van 35
What does a yellow sign with a black triangle usually mean?
- That smoking is allowed
- Warning of a hazard that is not likely to be life-threatening
- Where the first aid kit is
- That an action is mandatory
Toon antwoord
Antwoord: B. Warning of a hazard that is not likely to be life-threatening
Warning signs have a black triangle on yellow, for example a forklift hazard sign.
Vraag 29 van 35
A sign has the word DANGER in white on a red oval inside a black rectangle. What does it mean?
- The area is a smoking area
- There is a hazard that is likely to be life-threatening
- You must wear a hard hat
- First aid is available here
Toon antwoord
Antwoord: B. There is a hazard that is likely to be life-threatening
Danger signs warn of hazards likely to be life-threatening, such as high voltage.
Vraag 30 van 35
Which signs are green with white symbols or text?
- Fire equipment signs
- Prohibition signs
- Emergency information signs, such as exits and first aid
- Mandatory signs
Toon antwoord
Antwoord: C. Emergency information signs, such as exits and first aid
Emergency information signs, showing exits, safety equipment and first aid, are green with white text or symbols.
Vraag 31 van 35
A worker is seriously injured on site. When must the WHS regulator be notified?
- At the end of the project
- Within 30 days
- Only if the worker asks
- Immediately after becoming aware of it
Toon antwoord
Antwoord: D. Immediately after becoming aware of it
Deaths, serious injuries or illnesses and dangerous incidents must be notified to the regulator immediately.
Vraag 32 van 35
After a notifiable incident, what must be done with the incident scene?
- Clean it up straight away
- Take the damaged equipment home
- Leave it undisturbed until an inspector arrives or gives directions, except to help people or make it safe
- Restart work as normal
Toon antwoord
Antwoord: C. Leave it undisturbed until an inspector arrives or gives directions, except to help people or make it safe
The scene must not be disturbed, except to help an injured person, make the site safe or follow police or inspector directions.
Vraag 33 van 35
A tool falls from a scaffold but misses everyone. What should you do?
- Throw the tool away
- Report it as a near miss so the cause can be fixed
- Say nothing because nobody was hurt
- Leave the site for the day
Toon antwoord
Antwoord: B. Report it as a near miss so the cause can be fixed
Near misses and dangerous occurrences should be reported so hazards are fixed before someone is hurt.
Vraag 34 van 35
You reasonably believe a task would expose you to a serious risk from an immediate hazard. What can you do?
- Keep working so you do not lose pay
- Stop or refuse the work and tell the PCBU as soon as practicable
- Ask a new worker to do it instead
- Walk off site without telling anyone
Toon antwoord
Antwoord: B. Stop or refuse the work and tell the PCBU as soon as practicable
Workers can cease unsafe work in these cases, but must tell the PCBU and stay available for suitable alternative work.
Vraag 35 van 35
Why must workers not come to site affected by alcohol or drugs?
- It only matters for office staff
- It only matters if they are late
- It is fine if they feel okay
- It can put themselves and others at serious risk
Toon antwoord
Antwoord: D. It can put themselves and others at serious risk
Not working under the influence of drugs or alcohol is one of the safe work practices taught in white card training.

Gerelateerde examens