Lone Worker Safety Course for Security Guards 2026
This course is for security guards who work alone, such as night guards, mobile patrol officers and concierge staff. It explains what working alone means, what provincial safety laws expect, how check-in systems work and how to stay safe during a shift.
Resposta rápida
Este curso gratuito tem cerca de 15 minutos de lições e um teste de 25 perguntas. Com 80% ou mais pode descarregar um certificado de conclusão (privado, não acreditado). Verificado com fontes oficiais em 11 de outubro de 2026.
O que vai aprender
- Explain what working alone or in isolation means
- Describe what employers must do for lone workers in BC, Alberta and Ontario
- Use a check-in system correctly, including the end-of-shift check
- Follow the right steps when a check-in is missed
- Plan a safer shift, from arrival to handover
Obtenha 80% ou mais para descarregar o seu certificado.
-
Pergunta 1 de 25
Mostrar resposta
Resposta: C. When help would not be readily available if you were injured, ill or faced an emergency
BC defines working alone by whether help is readily available in an emergency, not by how many people are on the property.
-
Pergunta 2 de 25
Mostrar resposta
Resposta: B. Yes, if no one could see, hear or quickly help them
Working alone is about whether help would come quickly, not whether other people are somewhere in the building.
-
Pergunta 3 de 25
Mostrar resposta
Resposta: D. Identify the hazards and remove or reduce them
BC requires the employer to identify hazards first, then eliminate them or reduce the risk as far as practicable.
-
Pergunta 4 de 25
Mostrar resposta
Resposta: C. A check at the end of the shift
BC requires checks at set intervals plus a check at the end of the shift.
-
Pergunta 5 de 25
Mostrar resposta
Resposta: A. No fixed number; it is set for the job, with shorter intervals for higher-risk work
BC rules do not set a single interval. It is developed for the job, and higher-risk work needs shorter intervals.
-
Pergunta 6 de 25
Mostrar resposta
Resposta: A. The lone worker and the joint committee or worker representative
BC says intervals are developed with the joint health and safety committee or worker representative, and with the lone worker.
-
Pergunta 7 de 25
Mostrar resposta
Resposta: C. At least once a year, and sooner if something changes
BC requires at least an annual review, and an earlier one if the work changes or the procedures are reported not to work.
-
Pergunta 8 de 25
Mostrar resposta
Resposta: C. An effective way to communicate and regular contact suited to the hazards
Alberta requires a hazard assessment and an effective means of communication, with contact at regular intervals.
-
Pergunta 9 de 25
Mostrar resposta
Resposta: C. Visit the worker or have the worker check in at set times
If electronic contact is not practical, Alberta allows visits or scheduled check-ins instead.
-
Pergunta 10 de 25
Mostrar resposta
Resposta: B. Ways to summon immediate assistance
Ontario's OHSA requires the violence program to include measures for summoning immediate assistance.
-
Pergunta 11 de 25
Mostrar resposta
Resposta: A. To signal you need help when you cannot speak freely
A code word lets you ask for help without alerting someone who may be listening.
-
Pergunta 12 de 25
Mostrar resposta
Resposta: B. So someone still answers if the main contact is unavailable
If the main contact is busy or out of reach, a backup makes sure check-ins are still answered.
-
Pergunta 13 de 25
Mostrar resposta
Resposta: A. Use a radio, satellite device or other backup that works there
Communication tools must work where you are; poor coverage calls for a backup device.
-
Pergunta 14 de 25
Mostrar resposta
Resposta: B. When the worker does not reset the device in time
These devices raise an alarm if they are not reset within a set time, in case the worker cannot call.
-
Pergunta 15 de 25
Mostrar resposta
Resposta: D. Test it and make sure it is charged
A device that is dead or broken cannot get you help, so test and charge it first.
-
Pergunta 16 de 25
Mostrar resposta
Resposta: B. Stay back, report it and wait for police or backup
A lone guard should not enter a possible break-in alone; observe, report and wait for help.
-
Pergunta 17 de 25
Mostrar resposta
Resposta: B. So no one can predict where the guard will be
Predictable patrols make it easier for someone to avoid you or target you.
-
Pergunta 18 de 25
Mostrar resposta
Resposta: D. In a well-lit spot, facing out so you can leave quickly
Parking in light and facing out helps you see and leave quickly if needed.
-
Pergunta 19 de 25
Mostrar resposta
Resposta: D. Keep your distance, leave if needed and call for help
Lone guards should not confront people alone; distance and calling for help keep you safe.
-
Pergunta 20 de 25
Mostrar resposta
Resposta: B. Tell your supervisor
Fatigue slows reactions and judgment, so raise it with your supervisor.
-
Pergunta 21 de 25
Mostrar resposta
Resposta: D. Try to reach the guard right away by radio and phone
The first step is to try to make contact at once, then follow the plan if there is no answer.
-
Pergunta 22 de 25
Mostrar resposta
Resposta: C. Call 911 and send someone to the last known location
If the guard cannot be found or there are signs of danger, emergency help is needed without delay.
-
Pergunta 23 de 25
Mostrar resposta
Resposta: C. Tell dispatch as soon as it is safe
Letting dispatch know prevents confusion and makes sure they know you are busy, not hurt.
-
Pergunta 24 de 25
Mostrar resposta
Resposta: A. So the employer can update the hazard assessment and fix the gap
Hazard reports help improve the plan and protect every guard on the post.
-
Pergunta 25 de 25
Mostrar resposta
Resposta: A. Each action taken and the time it was taken
A written record of each step and time shows what was done and helps improve the procedure.
Teclado: 1–4 para responder, Enter para a pergunta seguinte.
O que saber antes do exame
- In BC, working alone or in isolation means working where help would not be readily available in an emergency, or if you are injured or ill.
- BC employers must have a written check-in procedure with set time intervals, a named person who makes contact, and a check at the end of the shift.
- BC regulations set no fixed check-in interval; higher-risk work needs shorter intervals, and procedures must be reviewed at least once a year.
- Alberta requires a hazard assessment for working alone and an effective way to communicate, with contact at regular intervals suited to the hazards.
- In Ontario, an employer's workplace violence program must include ways for workers to summon immediate assistance.
Perguntas frequentes
How often should a lone security guard check in?
There is no single national number. The interval is set by the employer based on the risks of the post, and higher-risk work needs more frequent checks. In BC, the interval must be set with input from the worker and the safety committee or representative.
What happens if I miss a check-in?
The person monitoring you should try to reach you, then follow the written plan. That usually means sending someone to check on you and calling 911 if you still cannot be reached.
Do all provinces have working alone rules?
Not in the same way. BC and Alberta have specific working alone rules. Ontario covers the risk mainly through its workplace violence rules. Check the rules where you work.
Is a cell phone enough for a lone worker?
Only if it works reliably at your site and is part of a check-in system. In places with poor coverage, use a radio, satellite device or another backup.
O certificado é acreditado ou reconhecido oficialmente?
Não. É um certificado de conclusão privado, apenas para o seu conhecimento. Não é reconhecido, acreditado nem aprovado por nenhum governo, entidade licenciadora, regulador ou instituição de ensino e não substitui qualquer licença, certificação ou formação exigida por lei.