Lone Worker Safety Course for Security Guards 2026
This course is for security guards who work alone, such as night guards, mobile patrol officers and concierge staff. It explains what working alone means, what provincial safety laws expect, how check-in systems work and how to stay safe during a shift.
In breve
Questo corso gratuito ha circa 15 minuti di lezioni e un test di 25 domande. Con l’80% o più puoi scaricare un attestato di completamento (privato, non accreditato). Verificato sulle fonti ufficiali in data 11 ottobre 2026.
Cosa imparerai
- Explain what working alone or in isolation means
- Describe what employers must do for lone workers in BC, Alberta and Ontario
- Use a check-in system correctly, including the end-of-shift check
- Follow the right steps when a check-in is missed
- Plan a safer shift, from arrival to handover
Ottieni almeno l’80% per scaricare il tuo attestato.
-
Domanda 1 di 25
Mostra la risposta
Risposta: C. When help would not be readily available if you were injured, ill or faced an emergency
BC defines working alone by whether help is readily available in an emergency, not by how many people are on the property.
-
Domanda 2 di 25
Mostra la risposta
Risposta: B. Yes, if no one could see, hear or quickly help them
Working alone is about whether help would come quickly, not whether other people are somewhere in the building.
-
Domanda 3 di 25
Mostra la risposta
Risposta: D. Identify the hazards and remove or reduce them
BC requires the employer to identify hazards first, then eliminate them or reduce the risk as far as practicable.
-
Domanda 4 di 25
Mostra la risposta
Risposta: C. A check at the end of the shift
BC requires checks at set intervals plus a check at the end of the shift.
-
Domanda 5 di 25
Mostra la risposta
Risposta: A. No fixed number; it is set for the job, with shorter intervals for higher-risk work
BC rules do not set a single interval. It is developed for the job, and higher-risk work needs shorter intervals.
-
Domanda 6 di 25
Mostra la risposta
Risposta: A. The lone worker and the joint committee or worker representative
BC says intervals are developed with the joint health and safety committee or worker representative, and with the lone worker.
-
Domanda 7 di 25
Mostra la risposta
Risposta: C. At least once a year, and sooner if something changes
BC requires at least an annual review, and an earlier one if the work changes or the procedures are reported not to work.
-
Domanda 8 di 25
Mostra la risposta
Risposta: C. An effective way to communicate and regular contact suited to the hazards
Alberta requires a hazard assessment and an effective means of communication, with contact at regular intervals.
-
Domanda 9 di 25
Mostra la risposta
Risposta: C. Visit the worker or have the worker check in at set times
If electronic contact is not practical, Alberta allows visits or scheduled check-ins instead.
-
Domanda 10 di 25
Mostra la risposta
Risposta: B. Ways to summon immediate assistance
Ontario's OHSA requires the violence program to include measures for summoning immediate assistance.
-
Domanda 11 di 25
Mostra la risposta
Risposta: A. To signal you need help when you cannot speak freely
A code word lets you ask for help without alerting someone who may be listening.
-
Domanda 12 di 25
Mostra la risposta
Risposta: B. So someone still answers if the main contact is unavailable
If the main contact is busy or out of reach, a backup makes sure check-ins are still answered.
-
Domanda 13 di 25
Mostra la risposta
Risposta: A. Use a radio, satellite device or other backup that works there
Communication tools must work where you are; poor coverage calls for a backup device.
-
Domanda 14 di 25
Mostra la risposta
Risposta: B. When the worker does not reset the device in time
These devices raise an alarm if they are not reset within a set time, in case the worker cannot call.
-
Domanda 15 di 25
Mostra la risposta
Risposta: D. Test it and make sure it is charged
A device that is dead or broken cannot get you help, so test and charge it first.
-
Domanda 16 di 25
Mostra la risposta
Risposta: B. Stay back, report it and wait for police or backup
A lone guard should not enter a possible break-in alone; observe, report and wait for help.
-
Domanda 17 di 25
Mostra la risposta
Risposta: B. So no one can predict where the guard will be
Predictable patrols make it easier for someone to avoid you or target you.
-
Domanda 18 di 25
Mostra la risposta
Risposta: D. In a well-lit spot, facing out so you can leave quickly
Parking in light and facing out helps you see and leave quickly if needed.
-
Domanda 19 di 25
Mostra la risposta
Risposta: D. Keep your distance, leave if needed and call for help
Lone guards should not confront people alone; distance and calling for help keep you safe.
-
Domanda 20 di 25
Mostra la risposta
Risposta: B. Tell your supervisor
Fatigue slows reactions and judgment, so raise it with your supervisor.
-
Domanda 21 di 25
Mostra la risposta
Risposta: D. Try to reach the guard right away by radio and phone
The first step is to try to make contact at once, then follow the plan if there is no answer.
-
Domanda 22 di 25
Mostra la risposta
Risposta: C. Call 911 and send someone to the last known location
If the guard cannot be found or there are signs of danger, emergency help is needed without delay.
-
Domanda 23 di 25
Mostra la risposta
Risposta: C. Tell dispatch as soon as it is safe
Letting dispatch know prevents confusion and makes sure they know you are busy, not hurt.
-
Domanda 24 di 25
Mostra la risposta
Risposta: A. So the employer can update the hazard assessment and fix the gap
Hazard reports help improve the plan and protect every guard on the post.
-
Domanda 25 di 25
Mostra la risposta
Risposta: A. Each action taken and the time it was taken
A written record of each step and time shows what was done and helps improve the procedure.
Tastiera: 1–4 per rispondere, Invio per la domanda successiva.
Cosa sapere prima del test
- In BC, working alone or in isolation means working where help would not be readily available in an emergency, or if you are injured or ill.
- BC employers must have a written check-in procedure with set time intervals, a named person who makes contact, and a check at the end of the shift.
- BC regulations set no fixed check-in interval; higher-risk work needs shorter intervals, and procedures must be reviewed at least once a year.
- Alberta requires a hazard assessment for working alone and an effective way to communicate, with contact at regular intervals suited to the hazards.
- In Ontario, an employer's workplace violence program must include ways for workers to summon immediate assistance.
Domande frequenti
How often should a lone security guard check in?
There is no single national number. The interval is set by the employer based on the risks of the post, and higher-risk work needs more frequent checks. In BC, the interval must be set with input from the worker and the safety committee or representative.
What happens if I miss a check-in?
The person monitoring you should try to reach you, then follow the written plan. That usually means sending someone to check on you and calling 911 if you still cannot be reached.
Do all provinces have working alone rules?
Not in the same way. BC and Alberta have specific working alone rules. Ontario covers the risk mainly through its workplace violence rules. Check the rules where you work.
Is a cell phone enough for a lone worker?
Only if it works reliably at your site and is part of a check-in system. In places with poor coverage, use a radio, satellite device or another backup.
L’attestato è accreditato o riconosciuto ufficialmente?
No. È un attestato di completamento privato, solo per le tue conoscenze. Non è riconosciuto, accreditato né approvato da alcun governo, ente di rilascio delle licenze, autorità di regolamentazione o istituto di istruzione e non sostituisce alcuna licenza, certificazione o formazione richiesta dalla legge.