FAA Part 107 Remote Pilot Test Preparation: Airspace, charts and airports

Prueba temática sin límite de tiempo: 18 preguntas sobre Airspace, charts and airports, con una explicación después de cada respuesta. Las preguntas y respuestas se mezclan cada vez.

  • Curso
  • Estados Unidos
  • 100 preguntas
  • Revisado el 13 de octubre de 2026
  • Verificado el 13 de octubre de 2026
Empieza por las leccionesFAA Part 107 Remote Pilot Test Preparation: Lessons: unos 360 minutos de lectura. Todas las preguntas del test se tratan en las lecciones.

Prueba temática 4: Airspace, charts and airports

  1. Pregunta 1 de 18

    Which airspace can you fly in without any ATC authorization under Part 107?
    Ver respuesta

    Respuesta: C. Class G

    14 CFR 107.41 requires ATC authorization for Class B, C, D and the surface area of Class E at an airport. Class G needs none.

  2. Pregunta 2 de 18

    Under 14 CFR 107.41, which airspace needs prior ATC authorization?
    Ver respuesta

    Respuesta: D. Class B, C or D, or Class E surface area at an airport

    14 CFR 107.41 requires prior ATC authorization in Class B, C or D airspace, or within the Class E surface area designated for an airport.

  3. Pregunta 3 de 18

    Class G airspace goes from the surface up to where?
    Ver respuesta

    Respuesta: D. The base of the overlying Class E airspace

    The Remote Pilot Study Guide says Class G extends from the surface to the base of the overlying Class E airspace.

  4. Pregunta 4 de 18

    Where does Class A airspace begin?
    Ver respuesta

    Respuesta: A. 18,000 feet MSL

    Class A generally begins at 18,000 feet MSL and goes up to FL 600. Small drones do not fly there.

  5. Pregunta 5 de 18

    In most areas, where does Class E airspace begin?
    Ver respuesta

    Respuesta: B. 1,200 feet AGL

    Most Class E bases are 1,200 feet AGL, though some begin at 700 feet AGL or the surface.

  6. Pregunta 6 de 18

    Class D airspace usually extends from the surface up to about what height?
    Ver respuesta

    Respuesta: A. 2,500 feet above the airport elevation

    The Remote Pilot Study Guide says Class D is generally from the surface to 2,500 feet above the airport elevation.

  7. Pregunta 7 de 18

    What is the usual radius of the surface area of Class C airspace?
    Ver respuesta

    Respuesta: A. 5 nautical miles

    Class C usually has a surface area with a 5 NM radius and an outer ring with a 10 NM radius.

  8. Pregunta 8 de 18

    What is LAANC?
    Ver respuesta

    Respuesta: B. A system that gives near-real-time airspace authorizations

    LAANC (Low Altitude Authorization and Notification Capability) gives airspace authorizations, often in near-real time, through FAA-approved suppliers.

  9. Pregunta 9 de 18

    A Part 107 pilot needs to fly above the altitude shown on a UAS Facility Map near an airport. What LAANC option fits?
    Ver respuesta

    Respuesta: C. A further coordination request, sent up to 90 days ahead

    Further coordination requests are for Part 107 pilots flying above the facility map ceiling, up to 400 feet, and can be sent up to 90 days ahead.

  10. Pregunta 10 de 18

    You got a LAANC authorization. What do you still have to check yourself?
    Ver respuesta

    Respuesta: C. NOTAMs, weather and other airspace restrictions

    The FAA says LAANC gives airspace authorization only. Pilots must still check NOTAMs, weather and all airspace restrictions.

  11. Pregunta 11 de 18

    On a sectional chart you see an area labeled P-40. What kind of area is it?
    Ver respuesta

    Respuesta: B. A prohibited area

    Prohibited areas are charted as P followed by a number, such as P-40. Flight is not allowed in them.

  12. Pregunta 12 de 18

    Your planned job is inside a restricted area (R-number). What does Part 107 require?
    Ver respuesta

    Respuesta: B. Permission from the agency that uses or controls the area

    14 CFR 107.45 requires permission from the using or controlling agency to fly in a prohibited or restricted area.

  13. Pregunta 13 de 18

    Where can you find the operating times and altitudes of a military operations area (MOA)?
    Ver respuesta

    Respuesta: C. On the back of the sectional chart

    MOAs are shown on sectional charts, and their times, altitudes and controlling agency are listed on the back of the chart.

  14. Pregunta 14 de 18

    A military training route on a chart is labeled VR1207. What do the four digits tell you?
    Ver respuesta

    Respuesta: A. No part of the route is above 1,500 feet AGL

    MTRs with no segment above 1,500 feet AGL have four digits (e.g., IR1206, VR1207). Routes with a segment above 1,500 feet use three digits.

  15. Pregunta 15 de 18

    How is a temporary flight restriction (TFR) issued?
    Ver respuesta

    Respuesta: B. By a flight data center (FDC) NOTAM

    A TFR is issued by an FDC NOTAM. Pilots are responsible for knowing about TFRs where they plan to fly.

  16. Pregunta 16 de 18

    A runway's magnetic direction is 274 degrees. What is its runway number?
    Ver respuesta

    Respuesta: B. 27

    Runway numbers are the magnetic direction divided by 10 and rounded to the nearest whole number: 274 ÷ 10 = 27.4, so runway 27.

  17. Pregunta 17 de 18

    Unless an airport shows otherwise, which way do airplanes turn in the traffic pattern?
    Ver respuesta

    Respuesta: B. To the left

    The AIM says traffic pattern turns are normally to the left. Right-hand patterns are marked on charts.

  18. Pregunta 18 de 18

    At a non-towered airport with no UNICOM or flight service station, which frequency is used as the CTAF?
    Ver respuesta

    Respuesta: D. MULTICOM, 122.9

    The Remote Pilot Study Guide says MULTICOM 122.9 is used at non-towered airports with no FSS or UNICOM. UNICOM is usually 122.8.

Exámenes relacionados