Food Hygiene and HACCP Course (EU): HACCP: the seven principles in practice
Prueba temática sin límite de tiempo: 18 preguntas sobre HACCP: the seven principles in practice, con una explicación después de cada respuesta. Las preguntas y respuestas se mezclan cada vez.
Prueba temática 6: HACCP: the seven principles in practice
-
Pregunta 1 de 18
Ver respuesta
Respuesta: C. A permanent procedure based on HACCP principles
Article 5 requires operators to put in place, implement and maintain a permanent procedure or procedures based on HACCP principles.
-
Pregunta 2 de 18
Ver respuesta
Respuesta: B. Hazard Analysis and Critical Control Point
HACCP stands for Hazard Analysis and Critical Control Point.
-
Pregunta 3 de 18
Ver respuesta
Respuesta: A. Basic conditions and activities that keep a business hygienic
FSAI describes PRPs as basic conditions and activities needed to keep a hygienic environment, such as cleaning, pest control and staff hygiene.
-
Pregunta 4 de 18
Ver respuesta
Respuesta: C. Identify the hazards
Principle 1 is to identify the hazards that must be prevented, eliminated or reduced to acceptable levels.
-
Pregunta 5 de 18
Ver respuesta
Respuesta: A. Draw a flow diagram and check it on site
The Commission notice lists preliminary steps: form a team, describe the product, identify its intended use, draw a flow diagram and confirm it on site.
-
Pregunta 6 de 18
Ver respuesta
Respuesta: D. When it is reasonably likely to reach an unacceptable level without control
The Commission notice defines a significant hazard as one reasonably likely to occur at an unacceptable level in the absence of control.
-
Pregunta 7 de 18
Ver respuesta
Respuesta: C. A step where control is essential to prevent or remove a hazard
The Commission notice defines a CCP as a step at which control can be applied and is essential for a food safety hazard.
-
Pregunta 8 de 18
Ver respuesta
Respuesta: D. Cooking
Thorough cooking kills pathogens in raw meat, so cooking is the classic CCP for this hazard.
-
Pregunta 9 de 18
Ver respuesta
Respuesta: B. A value or check that separates safe from unsafe
Article 5 says critical limits separate acceptability from unacceptability at CCPs.
-
Pregunta 10 de 18
Ver respuesta
Respuesta: D. The centre reaches 75 °C
FSAI gives a core temperature of 75 °C, or an equivalent such as 70 °C for two minutes, as the example critical limit for burgers.
-
Pregunta 11 de 18
Ver respuesta
Respuesta: A. No, it can be something you can observe
The Commission notice defines a critical limit as an observable or measurable criterion.
-
Pregunta 12 de 18
Ver respuesta
Respuesta: A. Monitoring
Monitoring means a planned sequence of observations or measurements to check that a CCP is under control.
-
Pregunta 13 de 18
Ver respuesta
Respuesta: D. Discard the food and get the fridge repaired
FSAI's example says that if a fridge reaches 10 °C because of a fault, the food is discarded and the fridge is repaired so it returns to 5 °C.
-
Pregunta 14 de 18
Ver respuesta
Respuesta: A. Probing food to check the new settings reach a safe temperature
Verification checks that the system works, for example after a change; FSAI gives this new-oven example.
-
Pregunta 15 de 18
Ver respuesta
Respuesta: C. Whenever the product, process or any step changes
Article 5 of Regulation 852/2004 says the procedure must be reviewed whenever any change is made to the product, process or any step.
-
Pregunta 16 de 18
Ver respuesta
Respuesta: A. They should suit the nature and size of the business
Article 5 requires documents and records appropriate to the nature and size of the business.
-
Pregunta 17 de 18
Ver respuesta
Respuesta: D. By keeping simpler records while meeting the same safety aims
The notice allows simplified documents and records, but flexibility is never applied to the objectives and is not meant to reduce the number of CCPs.
-
Pregunta 18 de 18
Ver respuesta
Respuesta: C. It does not count as a working food safety system
FSAI says you and your staff must be actively involved; a system that sits in a folder is not a food safety management system.
Teclado: 1–4 para responder, Intro para la siguiente pregunta.