PassEveryTest
English

Nunavut Traffic Control (Flagger) Course 2026

This course is for security guards and site workers in Nunavut who may work near traffic control persons (flaggers) or be asked to help with traffic. It explains the WSCC Traffic Control Person Code of Practice and the OHS Regulations on signallers. It is background knowledge only, not TCP training: your employer must train you and issue a TCP card.

  • Course
  • Nunavut
  • 25 questions
  • Checked October 12, 2026

Quick answer

This free course has about 25 minutes of lessons and a 25-question test. Score 80% or more to download a certificate of completion (private, not accredited). Checked against official sources on October 12, 2026.

Start with the lessonsNunavut Traffic Control (Flagger) Course: Lessons: about 25 minutes of reading. Every test question is covered in the lessons.

What you will learn

  • Name the Nunavut law and WSCC code that cover traffic control persons
  • Explain the employer's training duty and the one-year TCP card
  • Choose the right high-visibility clothing, paddle and night light
  • Pick a safe control position with an escape route
  • Give clear stop, slow and release signals and use radios correctly
  • Handle difficult drivers and emergency vehicles safely

Score 80% or more to download your certificate.

  1. Question 1 of 25

    Which body enforces workplace safety law, including traffic control rules, in Nunavut?
    Show answer

    Answer: C. The Workers' Safety and Compensation Commission

    The WSCC serves Nunavut and the Northwest Territories and issued the Traffic Control Person Code of Practice under the Safety Act and OHS Regulations.

  2. Question 2 of 25

    What term do Nunavut's Occupational Health and Safety Regulations use for a worker chosen to give signals to traffic or equipment?
    Show answer

    Answer: A. Designated signaller

    Section 1 of the regulations defines a designated signaller as a worker designated under paragraph 138(1)(a) to give signals.

  3. Question 3 of 25

    When did the WSCC Traffic Control Person Code of Practice take effect in Nunavut?
    Show answer

    Answer: C. May 31, 2016

    The code's foreword gives May 31, 2016 for Nunavut (June 1, 2015 for the Northwest Territories).

  4. Question 4 of 25

    Your employer hands you the WSCC Traffic Control Person Code of Practice. How does the law treat it in Nunavut?
    Show answer

    Answer: C. It is guidance that can be used in legal cases

    The code says you cannot be prosecuted just for not following it, but failing to follow it may be considered in legal proceedings. Follow it unless another method is as safe or safer.

  5. Question 5 of 25

    Under section 139 of Nunavut's OHS Regulations, what must the employer write, make available and train workers in?
    Show answer

    Answer: A. A traffic control plan

    Section 139(2) requires a written traffic control plan that is made available to workers, who must be trained in it.

  6. Question 6 of 25

    On a highway, when does section 139(4) let an employer use designated signallers to control traffic?
    Show answer

    Answer: D. Only when other control methods are not enough

    Section 139(4) allows designated signallers on a highway only if the other methods listed in section 139(2) are inadequate or unsuitable.

  7. Question 7 of 25

    Under section 138, what must an employer do for each designated signaller?
    Show answer

    Answer: C. Train them and keep a record of the training

    Section 138(1)(b) and (c) require training and a training record, with a copy given to the signaller.

  8. Question 8 of 25

    According to the WSCC code, how long is a Northwest Territories and Nunavut TCP training card valid?
    Show answer

    Answer: A. One year

    The TCP training card is valid for one year and must be signed by the trainer or employer.

  9. Question 9 of 25

    What must a TCP do with the training card while working?
    Show answer

    Answer: C. Carry it and show it to authorities if asked

    The code says the card must be carried on the job and shown to authorities on request.

  10. Question 10 of 25

    You move to a new job site in another community. What does the WSCC guidance say about training?
    Show answer

    Answer: C. You need site-specific training for every job location

    The training guideline says additional site-specific training has to be provided for every job location.

  11. Question 11 of 25

    Under section 139(1), what must an employer provide when a worker is at risk from vehicle traffic?
    Show answer

    Answer: B. High-visibility clothing, and require its use

    Section 139(1) requires the employer to provide high-visibility clothing and require the worker to use it.

  12. Question 12 of 25

    Which CSA standard does the WSCC High Visibility Apparel Code of Practice refer to?
    Show answer

    Answer: B. CAN/CSA-Z96-15

    The WSCC code refers to CAN/CSA-Z96-15, High-Visibility Safety Apparel, and advises using the current version.

  13. Question 13 of 25

    In the WSCC High Visibility Apparel Code, which class is given for flagging crews and night work?
    Show answer

    Answer: D. Class 3

    Class 3 gives the most coverage. The code lists flagging crews, traffic over 80 km/h and night work as Class 3 examples.

  14. Question 14 of 25

    Under section 138(2), what must a designated signaller have during darkness or poor visibility, besides high-visibility clothing?
    Show answer

    Answer: C. A suitable light

    Section 138(2)(b) requires a suitable light during darkness or poor visibility.

  15. Question 15 of 25

    According to the WSCC code, how tall must a STOP/SLOW paddle be?
    Show answer

    Answer: D. At least 1.6 m

    The code says the paddle must be at least 1.6 m tall and retroreflective on both sides.

  16. Question 16 of 25

    What are the colours of the SLOW side of the paddle in the WSCC code?
    Show answer

    Answer: A. Black letters on yellow

    STOP is white on red; SLOW is black letters on a yellow background.

  17. Question 17 of 25

    Unless it is mounted high on a post or barrier, what must the TCP warning sign display?
    Show answer

    Answer: A. Two red-orange flags

    The code says the TCP sign must display two red-orange flags unless it is mounted high.

  18. Question 18 of 25

    Where does the WSCC code place the TCP's control position?
    Show answer

    Answer: D. Halfway between the last sign and the taper

    The control position is halfway between the last sign and the taper, just outside the travel lane, with the paddle on the edge line.

  19. Question 19 of 25

    According to the WSCC code, about how far does a car need to stop at 100 km/h on dry, level pavement?
    Show answer

    Answer: D. About 210 m

    The code gives about 210 m (42 car lengths) at 100 km/h, and about 65 m at 50 km/h.

  20. Question 20 of 25

    Under section 139(5), when are at least two signallers needed?
    Show answer

    Answer: C. Traffic from both directions and no clear view

    One signaller is allowed for one-way traffic, or two-way traffic where the signaller and drivers can clearly see each other. Two-way traffic without a clear view needs at least two.

  21. Question 21 of 25

    Your radio stops working while traffic is stopped. What does the WSCC code say to do first?
    Show answer

    Answer: A. Keep your paddle as it is and repeat the message

    The code says not to change the paddles, to repeat the message and check the radio before following the radio-failure steps.

  22. Question 22 of 25

    How does a TCP signal an emergency or out-of-control vehicle to other TCPs, according to the code?
    Show answer

    Answer: C. Drop the paddle and wave both arms above your head

    The emergency signal is to drop the paddle, raise both arms and wave them rapidly above the head.

  23. Question 23 of 25

    What light does the WSCC code require a TCP to use at night?
    Show answer

    Answer: C. A flashlight with a red or orange cone

    At night the code requires a flashlight with a red/orange semi-transparent cone, plus reflective material on the hard hat and clothing.

  24. Question 24 of 25

    How often does the WSCC code suggest rotating a TCP?
    Show answer

    Answer: C. About every two hours

    The code suggests rotating a TCP every two hours, or as arranged with the supervisor.

  25. Question 25 of 25

    An angry driver starts shouting at you at the control position. What does the code tell you to do?
    Show answer

    Answer: C. Stay calm and give them your supervisor's contact info

    The code says not to argue or retaliate, to give the supervisor's contact information, and to leave if threatened with harm; then record and report it.

What to know before the test

  • In Nunavut, the WSCC Traffic Control Person Code of Practice took effect on May 31, 2016.
  • Employers must train designated signallers and keep a training record (OHS Regulations s. 138).
  • The NWT and Nunavut TCP training card is signed by the trainer or employer and is valid for one year.
  • A STOP/SLOW paddle must be at least 1.6 m tall and retroreflective on both sides.
  • The WSCC lists flagging crews as a Class 3 example under CAN/CSA-Z96-15 high-visibility apparel.

Frequently asked questions

Do I need a certificate to be a flagger in Nunavut?

The OHS Regulations require your employer to train you as a designated signaller and keep a record. Under the WSCC code, the employer or trainer signs a TCP training card that is valid for one year. This course does not give you that card.

Who enforces traffic control safety rules in Nunavut?

The Workers' Safety and Compensation Commission (WSCC), which serves Nunavut and the Northwest Territories, enforces the Safety Act and OHS Regulations.

Is there a sign-spacing table for Nunavut work zones?

The WSCC code does not give one. Sign types and locations are set in the written traffic control plan that section 139 requires for each site.

What should I do if my radio fails?

Do not change your paddle. Repeat the message and check the radio. Once failure is confirmed, follow the code's steps so traffic from both directions never moves at the same time.

Is the certificate accredited or officially recognised?

No. It is a private certificate of completion for knowledge only. It is not recognised, accredited or approved by any government, licensing body, regulator or educational institution, and it does not replace any licence, certification or training required by law.

Sources

Related tests