Safe Pass Practice Test (SOLAS) 2026: Test de práctica 2

Test de práctica 2 de 3 de Safe Pass Practice Test (SOLAS): 20 preguntas más con respuestas y explicaciones.

  • Seguridad laboral
  • Irlanda
  • 60 preguntas
  • Revisado el 10 de octubre de 2026
  1. Pregunta 1 de 20

    What is a near miss?
    Ver respuesta

    Respuesta: D. An event that could have caused injury or damage but did not

    Near misses should be reported, because the same cause could hurt someone next time.

  2. Pregunta 2 de 20

    You are hurt on site. Who should you tell first?
    Ver respuesta

    Respuesta: A. Your supervisor

    Tell your supervisor so the accident can be recorded and investigated, and the cause dealt with.

  3. Pregunta 3 de 20

    What is a hazard?
    Ver respuesta

    Respuesta: C. Anything that has the potential to cause harm

    A hazard is something that can cause harm, such as an open excavation, a live cable or a noisy machine.

  4. Pregunta 4 de 20

    In the hierarchy of controls, what should be done first?
    Ver respuesta

    Respuesta: A. Eliminate the hazard if possible

    Removing the hazard is the most effective control. PPE is the last line of defence.

  5. Pregunta 5 de 20

    Which supply voltage is the safer choice for portable power tools on a construction site?
    Ver respuesta

    Respuesta: B. 110 volts, centre-tapped to earth

    A reduced-voltage 110 V supply lowers the danger of a serious electric shock. Battery tools are safer still.

  6. Pregunta 6 de 20

    You see the cable on an extension lead is cut. What should you do?
    Ver respuesta

    Respuesta: C. Stop using it, take it out of use and report it

    Damaged electrical equipment can cause shock or fire. It must be checked and repaired by a competent person.

  7. Pregunta 7 de 20

    Before digging, how should you deal with possible underground cables?
    Ver respuesta

    Respuesta: A. Check the service drawings, use a cable locator and treat any cable as live

    Striking a buried cable can kill. Locate services before digging and dig carefully by hand near them.

  8. Pregunta 8 de 20

    Plant is working near overhead power lines. What helps prevent contact?
    Ver respuesta

    Respuesta: A. Barriers and height limits (goal posts)

    Contact with overhead lines can be fatal. Keep plant out of the danger zone with physical barriers and a safe system of work.

  9. Pregunta 9 de 20

    What is the main danger when working in a trench?
    Ver respuesta

    Respuesta: B. The sides can collapse and bury you

    Even a small fall of soil can crush or suffocate a worker. Trench sides must be supported or battered back.

  10. Pregunta 10 de 20

    Why should spoil heaps, materials and machines be kept back from the edge of an excavation?
    Ver respuesta

    Respuesta: A. Their weight can make the sides collapse

    Loads near the edge increase the risk of collapse. Keep them back and use stop blocks for vehicles.

  11. Pregunta 11 de 20

    How can the sides of a trench be made safe?
    Ver respuesta

    Respuesta: A. Support them with shoring or trench boxes, or slope them back

    Support or batter the sides so they cannot collapse on workers.

  12. Pregunta 12 de 20

    When should an excavation be inspected?
    Ver respuesta

    Respuesta: A. Before work starts each shift

    A competent person should inspect the excavation before work each shift and after anything that could affect it, such as heavy rain.

  13. Pregunta 13 de 20

    What should you think about first when planning work at height?
    Ver respuesta

    Respuesta: C. Whether the work at height can be avoided

    Avoid work at height if you can. If not, prevent falls with safe equipment, then minimise the distance and consequences of a fall.

  14. Pregunta 14 de 20

    What should be fitted to the open edges of a working platform?
    Ver respuesta

    Respuesta: B. Guardrails and toe boards

    Guardrails stop people falling, and toe boards stop tools and materials falling on people below.

  15. Pregunta 15 de 20

    What angle should a leaning ladder be at?
    Ver respuesta

    Respuesta: C. 1 unit out at the base for every 4 units up (about 75°)

    The 1 in 4 rule gives a safe angle of about 75°.

  16. Pregunta 16 de 20

    A ladder is used to reach a working platform. How far should it extend above the landing?
    Ver respuesta

    Respuesta: B. About 1 metre

    Extending about 1 metre above the landing gives you a handhold when stepping on and off.

  17. Pregunta 17 de 20

    A scaffold board or guardrail is in your way. What should you do?
    Ver respuesta

    Respuesta: C. Ask your supervisor; only a scaffolder may alter it

    Unauthorised changes can make a scaffold unsafe for everyone who uses it.

  18. Pregunta 18 de 20

    Why are fragile roofs, such as old cement sheets or roof lights, so dangerous?
    Ver respuesta

    Respuesta: B. They can give way under your weight

    Falls through fragile roofs are often fatal. Do not walk on them; use proper platforms and protection.

  19. Pregunta 19 de 20

    You see a workmate taking a dangerous short cut. What is the right response?
    Ver respuesta

    Respuesta: A. Speak up or tell your supervisor, so it can be stopped

    Behaviour-based safety means everyone looks out for unsafe acts and speaks up before someone is hurt.

  20. Pregunta 20 de 20

    Why does horseplay on site matter?
    Ver respuesta

    Respuesta: C. It can cause serious accidents and is forbidden by law

    Section 13 of the 2005 Act forbids improper conduct or behaviour likely to endanger anyone.

Exámenes relacionados