WHMIS Practice Test 2026: Practice test 2
Practice test 2 of 4 for the WHMIS Practice Test: 25 more questions with answers and explanations.
-
Question 1 of 25
Show answer
Answer: D. Organisms or toxins that can cause disease in people or animals
This is the pictogram for biohazardous infectious materials (Category 1).
-
Question 2 of 25
Show answer
Answer: A. It is a GHS pictogram for environmental hazards, which WHMIS does not require
WHMIS did not adopt the GHS environmental hazard group, so this pictogram is not a WHMIS requirement.
-
Question 3 of 25
Show answer
Answer: D. It has a black round border instead of a red diamond
The Hazardous Products Regulations require a black circle border for this pictogram. Other pictograms have a red border shaped like a square set on one point.
-
Question 4 of 25
Show answer
Answer: D. A flammable solvent
The flame pictogram is used for products that can ignite, such as flammable liquids.
-
Question 5 of 25
Show answer
Answer: A. Keep it away from clothing, paper and other materials that burn
Oxidizers can cause or intensify a fire, so they must be kept away from combustible materials.
-
Question 6 of 25
Show answer
Answer: C. The container may burst or explode if it is heated
Gas under pressure can make a container burst if it is heated. Refrigerated liquefied gases can also cause cold burns.
-
Question 7 of 25
Show answer
Answer: B. Danger
The skull and crossbones is used only for the most severe acute toxicity categories, which use the signal word "Danger".
-
Question 8 of 25
Show answer
Answer: A. Warning
The exclamation mark covers less severe hazards, which use the signal word "Warning".
-
Question 9 of 25
Show answer
Answer: B. Section 4, First-aid measures
Section 4 of the SDS gives first aid for skin and eye contact, inhalation and swallowing.
-
Question 10 of 25
Show answer
Answer: B. "May cause cancer"
The wording of hazard statements shows severity. "May cause cancer" is a greater hazard than "Suspected of causing cancer".
-
Question 11 of 25
Show answer
Answer: B. The flame
Self-reactive substances and organic peroxides of Type B use both the flame and the exploding bomb pictograms.
-
Question 12 of 25
Show answer
Answer: D. The flame
Chemicals under pressure, Categories 1 and 2, use both the flame and the gas cylinder pictograms.
-
Question 13 of 25
Show answer
Answer: A. It can cause an allergic skin reaction
A skin sensitizer can cause an allergic reaction in the skin after contact. Skin sensitizers use the exclamation mark.
-
Question 14 of 25
Show answer
Answer: C. Breathing it in may cause allergy or asthma symptoms
A respiratory sensitizer can cause allergy or asthma-like symptoms or breathing problems if inhaled. It uses the health hazard pictogram.
-
Question 15 of 25
Show answer
Answer: A. Corrosive to metals
The corrosion pictogram covers both health classes (skin corrosion, serious eye damage) and one physical class (corrosive to metals).
-
Question 16 of 25
Show answer
Answer: C. If swallowed, in contact with skin or if inhaled
Acute toxicity can be by the oral, dermal (skin) or inhalation route.
-
Question 17 of 25
Show answer
Answer: B. A red diamond (a square set on one of its points)
Most WHMIS pictograms have a black symbol on a white background with a red diamond-shaped border.
-
Question 18 of 25
Show answer
Answer: B. Combustible dusts (Category 1)
Combustible dusts, simple asphyxiants, flammable liquids Category 4 and a few others need no pictogram, but still need the other label elements.
-
Question 19 of 25
Show answer
Answer: B. The signal word, hazard statements and other required label elements
Even without a pictogram, the label and SDS Section 2 must still have the signal word, hazard statements and other elements.
-
Question 20 of 25
Show answer
Answer: C. "Danger" and "Warning"
WHMIS uses only two signal words. Some hazard categories have no signal word at all.
-
Question 21 of 25
Show answer
Answer: B. "Danger"
"Danger" is used for higher-risk hazards and "Warning" for less severe ones.
-
Question 22 of 25
Show answer
Answer: A. Only "Danger"
Where "Danger" is required, the requirement to show "Warning" does not apply.
-
Question 23 of 25
Show answer
Answer: A. Precautionary statements
Supplier labels need the product identifier, initial supplier identifier, pictograms, signal word, hazard statements and precautionary statements.
-
Question 24 of 25
Show answer
Answer: C. The pictogram, signal word and hazard statement
The pictogram, signal word and hazard statement must be grouped together so they are seen at a glance.
-
Question 25 of 25
Show answer
Answer: C. English and French
Supplier labels must be in both English and French, either on one bilingual label or on two labels.
Keyboard: 1–4 to answer, Enter for the next question.
The real test: No national exam. Any quiz and pass mark are set by your employer or training provider.