Alberta Class 1 Knowledge Practice Test 2026
The Class 1 knowledge test is part of getting a semi-truck licence in Alberta. These original questions follow Alberta's Commercial Driver's Guide and the Class 1 Learning Pathway, covering licensing, medicals, hours of service, inspections, coupling, dimensions and safe driving.
Quick answer
The Alberta Class 1 knowledge test has 30 questions. Pass mark: 25 of 30; the test stops after 6 wrong answers. It is run by Alberta Transportation and Economic Corridors; tests at registry agents. Minimum age: 18. Practise here for free with 130 questions, each with the answer and an explanation. Checked against official sources on October 10, 2026.
-
Question 1 of 25
Show answer
Answer: B. Any motor vehicle or combination of vehicles, except a motorcycle
Class 1 covers any motor vehicle or combination other than a motorcycle.
-
Question 2 of 25
Show answer
Answer: D. 18
You must be at least 18 years old for Class 1.
-
Question 3 of 25
Show answer
Answer: A. No, you need a full Class 5 licence first
Class 1 cannot be issued to a probationary (GDL) driver. You need a full Class 5 licence.
-
Question 4 of 25
Show answer
Answer: A. Single vehicles with 3 or more axles, towing trailers without air brakes
Class 3 covers single vehicles with three or more axles, towing trailers without air brakes.
-
Question 5 of 25
Show answer
Answer: D. Taxis, ambulances and buses seating up to 24 passengers
Class 4 covers taxis, ambulances and buses with seating for up to 24, not counting the driver.
-
Question 6 of 25
Show answer
Answer: A. The air brake (Q) endorsement
A Class 1 licence requires the Q endorsement first.
-
Question 7 of 25
Show answer
Answer: C. When you first apply, then every 5 years until age 45
A medical report is needed at first application, then every 5 years until 45.
-
Question 8 of 25
Show answer
Answer: B. Every 2 years
Between 45 and 65, Class 1 drivers need a medical report every 2 years.
-
Question 9 of 25
Show answer
Answer: C. Every year
After age 65, a medical report is needed every year.
-
Question 10 of 25
Show answer
Answer: B. 30 multiple-choice questions
The commercial knowledge test has 30 multiple-choice questions.
-
Question 11 of 25
Show answer
Answer: C. 25 of 30
You need 25 correct answers out of 30.
-
Question 12 of 25
Show answer
Answer: D. The test stops and is recorded as a fail
The test stops after six incorrect answers, because 25 of 30 is needed to pass.
-
Question 13 of 25
Show answer
Answer: C. A vision assessment
A vision assessment is required before upgrading.
-
Question 14 of 25
Show answer
Answer: A. 11,794 kg
The test vehicle must have a gross vehicle weight of at least 11,794 kg.
-
Question 15 of 25
Show answer
Answer: D. At least 45 feet, with 35 feet or more from kingpin to each rear axle centre
The single trailer must be at least 45 feet long, with at least 35 feet from the kingpin to the centre of each rear axle.
-
Question 16 of 25
Show answer
Answer: C. Full air brakes, tandem axles on both units and a fifth wheel
The test tractor-trailer needs full air brakes, tandem axles on both units and a fifth wheel.
-
Question 17 of 25
Show answer
Answer: D. A pre-trip inspection, coupling and uncoupling, and an air brake check
Class 1 road tests include a pre-trip inspection, coupling and uncoupling, and an air brake system check.
-
Question 18 of 25
Show answer
Answer: B. A restriction code is added to your licence
You may test in an automatic, but a restriction code then applies to your licence.
-
Question 19 of 25
Show answer
Answer: B. A person at least 18 years old who holds a Class 1 licence
A Class 1 learner needs a supervisor who is at least 18 and holds a Class 1 licence.
-
Question 20 of 25
Show answer
Answer: D. The Class 1 Learning Pathway
The Class 1 Learning Pathway replaced the earlier mandatory entry-level training on April 1, 2025.
-
Question 21 of 25
Show answer
Answer: A. A 40-hour Entry Program, online or at a driver training school
The Entry Program is 40 hours. After it, you can take the Class 1 knowledge test.
-
Question 22 of 25
Show answer
Answer: D. 67 hours of in-yard and in-cab training at a licensed Class 1 school
Core Learning is 67 hours of in-yard and in-cab training at a licensed school.
-
Question 23 of 25
Show answer
Answer: B. An 8-hour air brake course
Without a Q endorsement, an extra 8-hour air brake course is needed in Core Learning.
-
Question 24 of 25
Show answer
Answer: D. A provincially restricted Class 1 licence, valid in Alberta only
Passing the road test gives a provincially restricted Class 1 licence that covers Alberta only.
-
Question 25 of 25
Show answer
Answer: C. Complete the 10 to 18 hour Competence Building Program
Completing Competence Building removes the restriction. It is recommended within one year of Core Learning.
Keyboard: 1–4 to answer, Enter for the next question.
The real test: 25 of 30; the test stops after 6 wrong answers
What to know before the test
- The commercial knowledge test has 30 multiple-choice questions. You need 25 correct, and the test stops after six wrong answers.
- Since April 1, 2025, new Class 1 drivers follow the Class 1 Learning Pathway, which replaced the earlier mandatory entry-level training.
- The pathway starts with a 40-hour Entry Program, after which you can take the knowledge test at a registry agent.
- Passing the road test gives a provincially restricted Class 1 licence. Completing 10 to 18 hours of Competence Building removes the restriction.
- You need a full Class 5 licence and the air brake (Q) endorsement before a Class 1 licence can be issued.
- Class 1 drivers file a medical report every 5 years until 45, every 2 years from 45 to 65, and every year after 65.
Frequently asked questions
How many questions are on the Alberta Class 1 knowledge test?
The Commercial Driver's Guide says 30 multiple-choice questions, with 25 correct needed to pass. The test stops after six wrong answers.
Where do I take the Class 1 knowledge test?
At an Alberta registry agent. Under the Learning Pathway, you can take it after the 40-hour Entry Program.
Is MELT still required in Alberta?
Since April 1, 2025, the Class 1 Learning Pathway has replaced MELT. It has an Entry Program, Core Learning, the road test and Competence Building.
Do I need an air brake endorsement for Class 1?
Yes. A Class 1 licence cannot be issued without the Q endorsement. Core Learning includes an 8-hour air brake course if you do not already have it.