PassEveryTest
العربية

Northwest Territories Traffic Control Course 2026

This course is for security guards and other workers in the Northwest Territories who may be asked to help with traffic control. It covers the territory's rules for designated signallers, the WSCC code of practice, equipment, set-up and signals. It is background knowledge only and does not replace the site-specific training and TCP training card your employer must provide.

  • دورة
  • الأقاليم الشمالية الغربية
  • عدد الأسئلة: 25
  • تمت المراجعة في 12 أكتوبر 2026

إجابة سريعة

تتضمن هذه الدورة المجانية نحو 30 دقيقة من الدروس واختبارًا يضم 25 من الأسئلة. احصل على 80% أو أكثر لتنزيل شهادة إتمام (خاصة، غير معتمدة). تمت مراجعته مقارنةً بالمصادر الرسمية في 12 أكتوبر 2026.

ابدأ بالدروسNorthwest Territories Traffic Control Course: Lessons: نحو 30 دقيقة من القراءة. كل أسئلة الاختبار مشروحة في الدروس.

ما ستتعلمه

  • Explain who may act as a traffic control person in the NWT and what training the employer must give
  • Describe what a traffic control plan contains and when signallers may be used
  • Choose the right hi-vis apparel, paddle and night equipment
  • Set up a safe control position and escape route
  • Give clear stop, slow and release signals and handle a radio failure

احصل على 80% أو أكثر لتنزيل شهادتك.

  1. السؤال 1 من 25

    What do the NWT Occupational Health and Safety Regulations call a worker the employer names to direct traffic or equipment?
    أظهر الإجابة

    الإجابة: D. A designated signaller

    Section 138 of the NWT regulations uses the term designated signaller. On the job, this person is often called a traffic control person (TCP) or flagger.

  2. السؤال 2 من 25

    Under section 138, who must train a designated signaller and keep a record of the training?
    أظهر الإجابة

    الإجابة: A. The employer

    Section 138(1) requires the employer to designate and train the signaller, keep a record of the training and give the signaller a copy.

  3. السؤال 3 من 25

    What must a TCP in the NWT carry on the job and show to authorities when asked?
    أظهر الإجابة

    الإجابة: D. A TCP card signed by the trainer or employer

    The WSCC code says a TCP must have a training card signed by the trainer or employer, carry it on the job and show it when asked.

  4. السؤال 4 من 25

    How long is the NWT and Nunavut TCP training card valid?
    أظهر الإجابة

    الإجابة: B. One year

    The WSCC code of practice states that the TCP training card is valid for one year, with refresher training each year or as required.

  5. السؤال 5 من 25

    You already have general TCP training and you start at a new job location. What does WSCC guidance say you also need?
    أظهر الإجابة

    الإجابة: C. Site-specific training for that job location

    WSCC's TCP training guideline says additional site-specific training has to be provided for every job location.

  6. السؤال 6 من 25

    What is the legal status of the WSCC Traffic Control Person Code of Practice?
    أظهر الإجابة

    الإجابة: D. Not following it may count against compliance

    Codes of practice made under the Safety Act are guidance. Failure to follow one may be considered in deciding compliance with the Act and regulations.

  7. السؤال 7 من 25

    Under section 139(4), when may an employer use designated signallers to control traffic on a highway?
    أظهر الإجابة

    الإجابة: A. Only when other methods are not enough

    Section 139(4) says signallers must not be used on a highway unless the other listed methods of traffic control are inadequate or unsuitable.

  8. السؤال 8 من 25

    Traffic comes from both directions and the signaller and drivers cannot clearly see each other. Under section 139(5), how many signallers are needed?
    أظهر الإجابة

    الإجابة: B. Two

    Section 139(5) allows one signaller when traffic comes from one direction or the signaller and drivers can see each other, and requires two when they cannot.

  9. السؤال 9 من 25

    Under section 139, what must the employer develop when workers are at risk from vehicle traffic?
    أظهر الإجابة

    الإجابة: A. A written traffic control plan

    Section 139 requires a written traffic control plan, training for workers in the plan, and that the plan be readily available at the site.

  10. السؤال 10 من 25

    According to WSCC's TCP safety bulletin, what must each TCP do with the traffic control plan for the shift?
    أظهر الإجابة

    الإجابة: A. Know it and sign it

    The bulletin says TCPs must know and sign the shift's traffic control plan, and the supervisor keeps it on site.

  11. السؤال 11 من 25

    How tall must the stop/slow sign be under the WSCC code of practice?
    أظهر الإجابة

    الإجابة: C. At least 1.6 metres

    The WSCC TCP code of practice says the sign has to be at least 1.6 metres tall, with reflective sheeting on both sides.

  12. السؤال 12 من 25

    What colours are used on the SLOW side of the paddle in the NWT code?
    أظهر الإجابة

    الإجابة: D. Black letters on a yellow background

    The code says SLOW is black on yellow and STOP is white on red, and both sides must be reflective.

  13. السؤال 13 من 25

    Which standard does WSCC's high-visibility code of practice use for hi-vis apparel?
    أظهر الإجابة

    الإجابة: B. CSA Z96

    The WSCC PPE High Visibility Apparel code of practice is based on CSA Z96, High-Visibility Safety Apparel.

  14. السؤال 14 من 25

    WSCC lists flagging crews as high risk. Which class of hi-vis apparel does it point to for low light or night work?
    أظهر الإجابة

    الإجابة: D. Class 3

    For high-risk work such as flagging, the WSCC code points to Class 2 in daytime and Class 3 in low light.

  15. السؤال 15 من 25

    Where does the WSCC code say a TCP should stand?
    أظهر الإجابة

    الإجابة: B. Halfway between the last sign and the taper

    The code places the control position halfway between the last sign and the taper, just outside the travel lane, with the paddle on the edge line.

  16. السؤال 16 من 25

    The WSCC code says you should not set up your control position in which of these places?
    أظهر الإجابة

    الإجابة: A. On a bridge

    The code says not to flag on a bridge, near a railway crossing, over a hill, around a curve or on icy roads.

  17. السؤال 17 من 25

    When should the "TCP ahead" sign be displayed?
    أظهر الإجابة

    الإجابة: D. Only when TCPs are actively controlling traffic

    The code says the TCP sign is used only when TCPs are actively regulating traffic. Unless mounted high, it shows two red-orange flags.

  18. السؤال 18 من 25

    How often does the WSCC code say a TCP should be rotated from the control position?
    أظهر الإجابة

    الإجابة: D. Every two hours, or as the supervisor arranges

    The code says a TCP should be rotated every two hours, or as arranged with the supervisor.

  19. السؤال 19 من 25

    On dry, level pavement, about how far does a vehicle at 100 km/h need to stop, according to the WSCC code?
    أظهر الإجابة

    الإجابة: C. 210 metres

    The code gives 210 m (about 42 car lengths) at 100 km/h and 65 m at 50 km/h, and more for trucks, wet or icy roads and downhill traffic.

  20. السؤال 20 من 25

    How do you release stopped traffic under the WSCC code?
    أظهر الإجابة

    الإجابة: C. Turn the paddle to SLOW and wave drivers on with your arm

    The code says to turn the paddle to SLOW and then signal with the free arm. It says never to wave the sign.

  21. السؤال 21 من 25

    What is the emergency hand signal between partner TCPs in the WSCC code?
    أظهر الإجابة

    الإجابة: A. Drop the paddle and wave both arms above your head

    The code's emergency signal is to drop the paddle, raise both arms and wave them above the head.

  22. السؤال 22 من 25

    Your radio stops working while you are showing STOP. What does the WSCC code say to do with your sign?
    أظهر الإجابة

    الإجابة: B. Keep it as it is and repeat the message

    The code says not to change signs when a radio fails. Repeat the message and check the radio; if it has failed, the TCP showing SLOW stops a vehicle and asks the driver to report the failure to a person in authority.

  23. السؤال 23 من 25

    Which item does the WSCC code list as mandatory for TCPs working at night?
    أظهر الإجابة

    الإجابة: A. A flashlight with a red or orange cone

    For night work the code requires a flashlight with a red or orange cone, reflective material around the hard hat and reflective stripes on clothing. Section 138 also requires a suitable light in darkness.

  24. السؤال 24 من 25

    What does the NWT Driver's Manual say about speeding fines in construction zones when workers are present?
    أظهر الإجابة

    الإجابة: D. Fines for speeding are doubled

    The NWT Driver's Manual says speeding fines are doubled in construction zones if workers are present, and tells drivers to obey the flag person.

  25. السؤال 25 من 25

    A police officer arrives and starts directing traffic at your work zone. According to the NWT Driver's Manual, whose directions do drivers follow?
    أظهر الإجابة

    الإجابة: B. The officer's, since police overrule signs

    The Driver's Manual says directions given by a police officer overrule traffic signs or signals. Follow the officer's lead and coordinate with them.

ما يجب معرفته قبل الاختبار

  • Section 138 of the NWT Occupational Health and Safety Regulations makes the employer designate, train and keep training records for each designated signaller.
  • The NWT and Nunavut TCP training card is signed by the trainer or employer, must be carried on the job and is valid for one year.
  • Signallers may control traffic on a highway only when signs, barriers, flashing lights, pilot vehicles and other methods are inadequate or unsuitable.
  • The WSCC code calls for a stop/slow sign at least 1.6 metres tall: STOP white on red, SLOW black on yellow, reflective on both sides.
  • The NWT Driver's Manual tells drivers to obey the flag person and says speeding fines double in construction zones when workers are present.

الأسئلة الشائعة

Do I need a certificate to be a traffic control person in the NWT?

The NWT regulations require your employer to designate you, train you and keep a record of the training. The WSCC code calls for a TCP training card signed by the trainer or employer, valid for one year, plus site-specific training for each job. This course does not give you that card.

Who enforces traffic control safety rules in the NWT?

The Workers' Safety and Compensation Commission (WSCC) enforces the Safety Act and the Occupational Health and Safety Regulations in the NWT. Its safety officers can inspect work sites.

Can a security guard direct traffic on a public road in the NWT?

Only as a designated, trained signaller working under a written traffic control plan, and only where other methods of traffic control are not enough. Police directions overrule signs and signals.

What should a TCP wear at night in the NWT?

High-visibility apparel to CSA Z96 (WSCC points to Class 3 for flaggers in low light), reflective material around the hard hat, and a flashlight with a red or orange cone.

هل الشهادة معتمدة أو معترف بها رسميًا؟

لا. إنها شهادة إتمام خاصة للمعرفة فقط. وهي غير معترف بها أو معتمدة أو موافق عليها من أي حكومة أو جهة ترخيص أو هيئة تنظيمية أو مؤسسة تعليمية، ولا تحل محل أي رخصة أو شهادة أو تدريب يفرضه القانون.

المصادر

اختبارات ذات صلة