Alarm Response Course for Security Guards 2026
This course is for security guards who respond to fire, intrusion, panic and trouble alarms on site or on mobile patrol. It covers single-stage and two-stage fire alarms, the annunciator, silencing and resetting, police verified response, safe intrusion response and reporting.
إجابة سريعة
تتضمن هذه الدورة المجانية نحو 30 دقيقة من الدروس واختبارًا يضم 25 من الأسئلة. احصل على 80% أو أكثر لتنزيل شهادة إتمام (خاصة، غير معتمدة). تمت مراجعته مقارنةً بالمصادر الرسمية في 11 أكتوبر 2026.
ما ستتعلمه
- Tell the difference between fire, intrusion, panic and trouble alarms
- Explain how single-stage and two-stage fire alarms work
- Respond to a fire alarm using the fire safety plan
- Explain why alarms should not be silenced or reset early
- Respond safely to intrusion and panic alarms
- Write a complete alarm response report
احصل على 80% أو أكثر لتنزيل شهادتك.
-
السؤال 1 من 25
أظهر الإجابة
الإجابة: D. As a real emergency until it is confirmed otherwise
Fire departments ask that every alarm be treated as an emergency. Even a likely false alarm must be answered and checked.
-
السؤال 2 من 25
أظهر الإجابة
الإجابة: B. All the alarm bells sound right away
In a single-stage system, every activation sounds the general alarm throughout the building at once.
-
السؤال 3 من 25
أظهر الإجابة
الإجابة: C. An alert signal that tells staff a fire may be happening so they can investigate
The first stage, or alert signal, tells supervisory staff to investigate before the building-wide alarm signal sounds.
-
السؤال 4 من 25
أظهر الإجابة
الإجابة: B. 5 minutes
If staff do not confirm the situation within 5 minutes, the system automatically goes to the second stage, the evacuation alarm.
-
السؤال 5 من 25
أظهر الإجابة
الإجابة: C. Investigating and verifying whether the event is real
Vancouver's bulletin says the time is for investigation, not for acknowledging or silencing the system.
-
السؤال 6 من 25
أظهر الإجابة
الإجابة: B. At the first stage, the alert signal
The fire department must be notified and respond at the first stage, not wait for the second stage.
-
السؤال 7 من 25
أظهر الإجابة
الإجابة: B. Which zone or device set off the alarm
The annunciator shows the zone or device in alarm, so you know where to go and what to tell firefighters.
-
السؤال 8 من 25
أظهر الإجابة
الإجابة: A. Only after the fire department has arrived and evaluated the situation
Silencing too early can leave people unaware of a real fire. The fire department should evaluate first.
-
السؤال 9 من 25
أظهر الإجابة
الإجابة: A. The bells may not restart on their own if the fire grows, and people may not leave
In most newer systems, silenced audible devices will not restart automatically. Premature silencing has led to fire deaths.
-
السؤال 10 من 25
أظهر الإجابة
الإجابة: A. Record the information shown on the panel
Resetting can erase the alarm location. Recording it first helps firefighters and technicians find the cause.
-
السؤال 11 من 25
أظهر الإجابة
الإجابة: A. Firefighters may have to search the whole building instead of one zone
An early reset loses the zone information, so crews must search everywhere and stay out of service longer.
-
السؤال 12 من 25
أظهر الإجابة
الإجابة: B. They may be charged false alarm fees
Continued operation of a faulty system may lead to false alarm fees, so faults must be reported and fixed.
-
السؤال 13 من 25
أظهر الإجابة
الإجابة: B. Follow the fire safety plan and let the fire department confirm
Even a likely false alarm must be handled by the plan. The fire department decides when it is safe to silence or reset.
-
السؤال 14 من 25
أظهر الإجابة
الإجابة: B. Police are sent only after the alarm is confirmed to show likely criminal activity
Under verified response, police dispatch to property alarms only after verification of a crime or threat to safety.
-
السؤال 15 من 25
أظهر الإجابة
الإجابة: B. An on-scene witness, such as a guard or keyholder
Hamilton accepts audio, video, an on-scene witness (owner, keyholder, guards) or multiple sensors activating in a suspicious sequence.
-
السؤال 16 من 25
أظهر الإجابة
الإجابة: C. They respond without needing verification
Panic, hold-up and duress alarms signal a threat to people, so police dispatch right away without verification.
-
السؤال 17 من 25
أظهر الإجابة
الإجابة: C. Two or more separate sensors activating in a sequence that suggests someone is moving inside
Multiple activations in a suspicious sequence can verify that someone may be inside.
-
السؤال 18 من 25
أظهر الإجابة
الإجابة: A. Stay outside in a safe spot, call police with what you see, and keep watching
Signs of a break-in mean someone may still be inside. Your role is to observe and report from a safe place and let police enter.
-
السؤال 19 من 25
أظهر الإجابة
الإجابة: A. Check the outside of the building from a safe distance for signs of entry
An outside check of doors, windows and roof access shows whether there are signs of forced entry before anyone goes in.
-
السؤال 20 من 25
أظهر الإجابة
الإجابة: C. Its exact location and condition, without touching it
Recording the location and condition, and not touching it, keeps possible evidence intact for police.
-
السؤال 21 من 25
أظهر الإجابة
الإجابة: C. A sign of a fault in the system, such as a wiring or power problem
A trouble signal means part of the system may not work properly. It must be reported, and a long-lasting trouble may require a fire watch.
-
السؤال 22 من 25
أظهر الإجابة
الإجابة: C. A modified fire watch
Queen's procedure requires a modified fire watch when a trouble condition lasts more than one hour.
-
السؤال 23 من 25
أظهر الإجابة
الإجابة: B. Times, the zone or device, what you found, who you notified and what was done
A complete record helps the owner fix causes of false alarms and shows that procedures were followed.
-
السؤال 24 من 25
أظهر الإجابة
الإجابة: A. Your supervisor or the building contact, so a service company can repair it
Faulty systems must be repaired by a qualified service company. Report so the owner can arrange it.
-
السؤال 25 من 25
أظهر الإجابة
الإجابة: D. Treat it as a possible threat to people, call police and approach carefully, or observe from a safe place
Panic and hold-up alarms mean someone may be in danger. Police respond immediately, and your safety comes first.
لوحة المفاتيح: 1–4 للإجابة، وEnter للسؤال التالي.
ما يجب معرفته قبل الاختبار
- In a two-stage system, staff have 5 minutes to investigate the alert signal before the evacuation alarm sounds automatically.
- Vancouver Fire Rescue Services recommends silencing or resetting only after the fire department has arrived and evaluated the situation.
- Hamilton Police dispatch to property alarms only when they are verified, for example by an on-scene guard or keyholder.
- Panic, hold-up and duress alarms do not need verification; police are dispatched immediately.
- Record the alarm panel information before any reset, because the alarm location can be lost.
الأسئلة الشائعة
Can a security guard silence a fire alarm?
Follow your site's fire safety plan. Fire departments such as Vancouver's recommend silencing only after firefighters have arrived and evaluated the situation.
What is verified response?
Some police services only send officers to property alarms after the alarm is confirmed by audio, video, an on-scene witness such as a guard, or multiple sensors.
Should I go inside if I see signs of a break-in?
No. Stay in a safe place, call police with what you see and keep watching. Let police enter the building.
What is a two-stage fire alarm?
It sounds an alert signal for staff first, then an evacuation alarm if the situation is not confirmed within the set time, such as 5 minutes.
هل الشهادة معتمدة أو معترف بها رسميًا؟
لا. إنها شهادة إتمام خاصة للمعرفة فقط. وهي غير معترف بها أو معتمدة أو موافق عليها من أي حكومة أو جهة ترخيص أو هيئة تنظيمية أو مؤسسة تعليمية، ولا تحل محل أي رخصة أو شهادة أو تدريب يفرضه القانون.